The Influence of Wetting Agent and Type of Nozzle on Copper Hydroxide Deposit on Sugar Beet Leaves (Beta vulgaris L.)

Date

2022

Authors

Sedlar A.
Gvozdenac, Sonja
Pejović M.
Višacki, Vladimir
Turan J.
Tanasković, Snežana
Burg, Patrik
Vasić F.

Journal Title

Journal ISSN

Volume Title

Publisher

Abstract

Protective fungicides are sensitive to environmental conditions such as rainfall and solar radiation. Therefore, it is important to prolong the biological activity and fungicide resistance to the above-mentioned factors that can be achieved by adding a wetting agent to the working solution. Additionally, the quality and efficiency of preventive contact fungicides significantly depend on the application technique. Thus, it is important to make the right choice of the nozzles and adjust the working parameters of the treatment. The aim of this work is to determine the influence of a wetting agent and type of nozzle on copper hydroxide (2 L ha−2) deposits on sugar beet leaves. Experiments are set up under laboratory and field conditions. A pinole-based wetting agent is applied at three rates (0.3, 0.6, and 1.0 L ha−1) and two types of nozzles are used (standard with flat jet and modern turbo-drop twin-jet). A brilliant blue tracer is added to a working solution to enable the measurement of copper hydroxide deposits. The deposit amount is recorded before and after the rain simulation (15 L m−2) with a spectrophotometer light beam. In order to ensure the timeliness of the application of fungicides, remote sensing of vegetative indices is used as an indicator of disease occurrence. The results indicated an increase in copper hydroxide deposits with the increase in wetting agent rates for both types of nozzles and in both laboratory and field experiments. Moreover, when applying the copper hydroxide mixtures with modern turbo drop nozzles, the increase in copper hydroxide deposit is significant, compared to the standard nozzles.

Description

Keywords

Citation